Vertical home lift

PLATFORM “Low-Up”

MAIN FEATURES :

• Useful load : 225 kg.
• Travel speed nominale : 0,1 m/sec 
• Electric alimentation : 230 Vac three phased, departure 10A
• Machinery space : under the tray
• Drive system : electric actuator
• Number of starts/hour : 20 ( 10 up / 10 down )
• Compliance  : Directive Machine 2006/42/CE

PROTECTIONS :

• A fall arrest system consists of an inclined lift prevents recoil of the wheelchair.
• Bellows anti-crush

MACHINERY

• Machine type: The electric propulsion device is placed at the bottom under the tray
• Power supply: 230 Vac single phase driving force (10A)

PLATFORM for race from 0,8m to 3m maximum

The platform, with two returns with a lateral integrating the control panel and doors low board will be driven by a device consisting of two screw and nut with electric drive.

The machinery will also be placed on the ground attached to the back wall of the sheath through a system of screws and plugs suitable for expansive material of the masonry of the sheath.

Access to the platform is done through two pairs of symmetrical doors facing each other. The platform serves two levels.

The facilities are in accordance with Directive 2006/42/EC – Machines, RA 5 May 1995 implementing Directive CEC laws of the Member States relating to machinery, and ARAB RGIE. They are CE marked and are supplied with CE declaration of conformity.

The entire structure is galvanized steel coating platform is serrated aluminum ensuring the anti-slip. <br> <br>The interfaces are equipped with control buttons embossed.
The interfaces are equipped with control buttons embossed. The interface on the platform is also equipped with an emergency stop button type “punch” with hold-emergency stop “activated”.

Each level is equipped with an interface with push buttons “up” and “down” the higher level are integrated in support of motorization.

Signs: a nameplate showing the CE, the maximum load and the instructions for maneuver is placed on the control panel of the platform and the outside, the control interface at each level. The information is engraved in white letters on a blue background on a surface anti-reflection. The letters and numbers measure at least 6 mm high. Directions in French.

FUNCTIONAL CHARACTERISTICS :

Electrical safety: emergency stop button on the control panel. Anti-crush on the platform. Overload electrical triggering all electrical phases.

Mechanical safety device: bellows intrusion (optional). A lock nut under each nut motorization.

The anchor may be made by expandable plugs on one side (the exit face the bottom of the sheath), the mechanism is on the side of the anchor reinforcements serve as guides and lateral supports for the structure.

The gates are attached to the floor guides on each side and, if absent from the shelf, a locking mechanism to prevent their doors open.

The doors are fitted with a reminder system (spring) to the closed position and may open on a 90 ° to the inside or outside the elevator. In these extreme opening positions, the door is not recalled to the closed position. It is the movement of the platform that causes the closing of gates from the static positions of extreme openness.

The buttons are of type “constant pressure” the lift stops immediately when the pressure is released.

CHARACTERISTICS AND DIMENSIONS :
The elevator will present the functional characteristics such as to enable it to meet the conditions set out above but in particular:

- The permissible load of 300 kg (2 people + a chair);

- The movement speed of 6 cm / sec.

- In its standard configuration, installation requires no bowl. The platform is positioned at a height of 3 cm (the ramp of 25 cm is provided to allow the crossing of the 3 cm). If you select the option boot intruder at least one bowl of 15.5 cm will be expected. The realization of this basin and the drainage system of this basin will be in this case the customer;

- The parties return side windows attached to the platform and doors are made of polycarbonate;

- The gates of the access floor are fixed on the media drive unit with a clearance of 91 cm;

- The doors of the ground floor are set on the tray of the apparatus with a clearance of 104 cm;

- Drive the platform (screw-nut) type electrical (power 1.5 kW), supply voltage 3 x 400 V + N possibility of obtaining the 220 surcharge.

- Control voltage: 24 Vdc